Wizard to quickly define a complete simulation project. Step 10 Choose placement X = 9.7 and Y = 13. This is where on the drawing the lower left corner will be placed (inner wall). Give the building the following measurements (between inner walls): Length = 63.9 m Width = 40 m Height = 8 m (between the beams). No of modules in X-direction = 6 No of modules in Y-direction = 2 Choose beams in Y-direction. Beam height = 1 m means a clear height under the beams of 8 m less 1 m = 7 m. Click next. Note that you can jump between the input boxes with the TAB-key.