Getting started. Step 00 - Important buttons and concepts - The 3D settings are interesting during the simulation or when you walk about in the model. E.g. Racking detailed will provide all beams etc. from the racking. Note that Racking detailed and Show pallets in racking, will demand a good graphics capability from your computer. - Aisles must not overlap!!! - Parallell aisles must not be connected without a crossing aisle in between!!! - An aisle to which a rack is connected must be at least the same length as the rack!!! - Level 0 and level 1 both indicate the ground level. - At each point it is possible to ask for Help, which provides help on that particular topic. A more step by step guide can be found in the Howto-files.